SAP Calculations For Scotland
If your project is located in Scotland, you’ll need to comply with the Scotland Section 6 Building Standards for successful completion. We’re here to help ensure that all standards are met and your project can reach its full potential!
What is are SAP Calculations for Scotland?
In Scotland, Section 6 of Building Standards must be complied with for all new dwellings. The same rules that apply to England and Wales when it comes to SAP Calculations are applied here too, however Scottish regulations tend to be a bit more rigorous than in the rest of the UK.
The main objective to achieve compliance with these calculations is to make sure that the Dwelling Emission Rate (DER) and Dwelling Fabric Energy Efficiency (DFEE) rate is lower or equal to the Target Emission Rate (TER). The former describes the actual emission rate of your constructed or designed property while TER represents an estimation based on a property with similar dimensions as this one but in Scotland also assumes that some form of renewable energy has been used.
Scottish Government has confirmed that the implementation date of the Section 6 (Energy) Standard 2022, will be moved from the 1st December 2022 to 1st February 2023. This means any Building Regulation applications received after 1st February 2023 will need to comply with the updated standard assessment procedure. We hope this news helps in your planning and assures you of our commitment to keeping you informed and up-to-date!
What’s Included in Our SAP Calculation Service?
Comprehensive Documentation: We provide all the necessary SAP calculation documentation required for full compliance with the Building Regulations, from the initial Design Stage (Predicted Energy Assessment or PEA) through to the final On Construction stage (On-Construction EPC or OC-EPC).
Expert Guidance for Success: If your project needs a little boost to meet energy efficiency targets, we offer tailored advice and recommendations to ensure a pass every time.
Dedicated Support: We’re with you every step of the way, offering clear communication and answering any questions you may have throughout the SAP assessment process.
Quick Turnaround: We understand that time is of the essence in construction projects. That’s why we prioritise efficiency and offer quick turnaround times for your SAP calculations.
Holistic Building Performance: We understand that a successful project goes beyond just energy efficiency. That’s why we offer a range of complementary services, such as air tightness testing, sound insulation testing, and ventilation assessments, to ensure your building performs optimally across multiple aspects.
What is Section 6 (Energy)?
Are you looking to construct a new residence or commercial building in Scotland? If so, you’ll need to adhere to Section 6 of the Building Standards – which covers energy efficiency, ventilation and overheating prevention for residential and non-residential buildings.
To ensure your construction meets standards, specialist energy compliance software is used to calculate performance levels before and after completion. In Scotland, local authorities are allocated as ‘verifiers’ who assess designs and building checks independently; guaranteeing all regulations have been met.
We are pleased to confirm that the Scottish Government’s Technical Handbooks webpage will soon be updated to reflect the decision to postpone the formalisation of an amendment to the Building (Scotland) Regulations 2004.
Please note: Standard Assessment Procedure, or SAP Calculations, are different from an Energy Performance Certificate. Typical SAP Calculations are used to demonstrate to building control how a building or conversion will comply with building regulations due to a ‘material change’ or ‘change in energy status’ while an EPC demonstrats the energy efficiency of a building.
Part L1A
SAP Calculations for New Builds
All new dwellings must now have a SAP calculation performed at design stage in order to demonstrate compliance with Part L1A of the Building Regulations.
Part L1B
SAP Calculations for Extensions
If you build an extension where the glazing is over 25% of the floor area, then we can undertake SAP Calculations to demonstrate Part L1B Building Regs compliance.
Part L1B
SAP Calculations for Conversion
If you renovate a building such that there has been a material change in use, then we can undertake SAP Calculations to demonstrate Part L1B Building Regs compliance.
Related Sustainability Services
Noise Impact Assessment is frequently combined with the following additional services:
U-Value Calculations
Find out morePsi Value Calculations
Find out moreCondensation Risk Assessment
Find out morePart O – Overheating Assessments
Find out moreAir Tightness Testing
Find out moreNew Build EPC
Find out moreOur Process
Ready to get started?
SAP Calculations for Scotland from £80+VAT. Same day quotes available.
Ready to ensure your building project meets the highest standards of energy efficiency? Contact Focus 360 Energy today for a bespoke SAP Calculation quote. Let our accredited professionals guide you to compliance and beyond, with expert advice, efficient service, and competitive pricing. Start your journey to a greener, more efficient future now.
Click the Get a Quote link to access our online portal, or use the form to share brief details about your project and we will respond promptly.
Why choose Focus 360 Energy
Experienced Engineers: Our expert engineers know the most up-to-date SAP and Part L regulations.
Tailored Solutions: Focus 360 Energy provides unique solutions for each build.
Competitive Pricing: SAP Calculations from just £80 + VAT
Fast Service: Receive a same-day quote and fast turnaround for SAP Calculations.
Frequently Asked Questions
If you plan to add an extension or conservatory, a Heat Loss Calculation will be needed to ensure it meets the required thermal standards. These can vary depending on the overall energy performance of your existing dwelling, so you may need to carry out full SAP calculations for your property in order to demonstrate compliance. The same goes for any conversions – don’t forget your Heat Loss Calculation! Our team are knowledgeable and happy to explain what this entails – just get in touch with us!
We have a wealth of experience across the UK, and are particularly proud of our comprehensive knowledge in Scotland. Our team of highly qualified energy consultants offer you an in-depth understanding of Building Regulations to ensure your project meets Section 6 regulations. We’ll be here with you every step of the way, from design to completion, delivering friendly, knowledgeable advice that puts your requirements first.
Simply download and complete our checklist and supply all the required information to us and we are able to offer a fast and efficient 5 day turnaround for SAP calculations. If this isn’t soon enough for you, then our expert team can further accelerate the process for just £75 + VAT.
SAP calculations are mandatory for new dwellings to demonstrate compliance with Part L of the Building Regulations (England & Wales) or Section 6 (Scotland). They’re essential for obtaining building permits and ensuring your project meets energy efficiency standards.
Ideally, SAP calculations should be integrated into the early design stages of your project. This allows you to optimise energy efficiency from the outset and avoid costly modifications later. However, a final SAP assessment is also required upon completion for compliance and to generate the official EPC.
Multiple factors impact your SAP rating, including the building fabric (insulation, windows, airtightness), heating and hot water systems, ventilation, lighting, and renewable energy installations.
While it’s best to optimise energy efficiency during the design phase, some improvements can be made after construction. However, these can be more costly and disruptive. A professional SAP assessor can advise on potential retrofitting options.
The cost varies depending on the complexity and size of your project. At Focus360 Energy, our SAP Calculation services start from £80 + VAT, and we offer same-day quotes for your convenience.
Our team of accredited assessors provides accurate and comprehensive SAP calculations, ensuring compliance and offering expert guidance on optimising energy efficiency.
Our team of accredited assessors provides accurate and comprehensive SAP calculations, ensuring compliance and offering expert guidance on optimising energy efficiency.
Contact us today for a free, no-obligation quote and let our experts guide you through the SAP assessment process, ensuring your project’s success and compliance.
Yes, SAP calculations for projects in Scotland are different from those in England and Wales. This is because the Scottish Building Regulations have different requirements for energy performance in buildings compared to the regulations in England and Wales. In Scotland, the SAP calculation must be carried out by a qualified and accredited assessor, and the results must be submitted to the local authority as part of the building control process.Also the Dwelling Fabric Energy Efficiency (DFEE) target is not applicable in Scotland, but the elemental U-Value limits are stricter.
In England and Wales, the SAP calculation is part of the mandatory EPC that must be produced when a building is built, sold, or leased. Therefore, it is important to use an experienced and qualified assessor who is familiar with the specific requirements of the Scottish Building Regulations when carrying out SAP calculations for projects in Scotland.
